ChipTest/PAN159/PAN159-Template/SampleCode/Template/main.c

/*******************************************************************************
 * @note      Copyright (C) 2017 Shanghai Panchip Microelectronics Co., Ltd.
 *            All rights reserved.
 *
 * @file      main.c
 * @brief     
 *
 * @history - V1.0, 2018-01-19, huoweibin, first implementation.
*******************************************************************************/
#include <stdio.h>
#include "Mini58Series.h"
#include "user_softdelay.h"
#include "lib_driver_adc_pan159.h"
#include "lib_driver_delay_pan159.h"
#include "lib_driver_flash_pan159.h"
#include "lib_driver_gpio_pan159.h"
//#include "lib_driver_iic_pan159.h"
#include "lib_driver_swiic_pan159.h"
#include "lib_driver_pwm_pan159.h"
#include "lib_driver_rfspi_pan159.h"
#include "lib_driver_uart_pan159.h"
#include "lib_driver_timer_pan159.h"
#include "lib_driver_wdt_pan159.h"
#include "lib_driver_xn297l.h"
//
#include "bsp.h"

uint32_t xx,yy;
void SYS_Init(void)
{
    /* Unlock protected registers */
    SYS_UnlockReg();

		/* Enable external 12MHz XTAL, HIRC */
    CLK->PWRCTL =  CLK_PWRCTL_HIRCEN_Msk;

    /* Enable HIRC clock (Internal RC 22.1184MHz) */
    CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN_Msk);
    CLK_EnableXtalRC(CLK_PWRCTL_LIRCEN_Msk);
    
    /* Wait for HIRC clock ready */
    CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk);

    CLK->CLKSEL0 |= CLK_CLKSEL0_HCLKSEL_Msk;
    CLK->CLKDIV &= (~CLK_CLKDIV_HCLKDIV_Msk);

    /* Configure PLL setting if HXT clock is enabled */

    CLK_EnablePLL(CLK_PLLCTL_PLLSRC_HIRC, (FREQ_50MHZ << 1));

    CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_PLL, CLK_CLKDIV_HCLK(2));
//    xx = CLK_SetCoreClock(50000000);


    // Enable module clock
    CLK_EnableModuleClock(UART0_MODULE);
    //CLK_EnableModuleClock(UART1_MODULE);
    CLK_EnableModuleClock(ADC_MODULE);
    //CLK_SetModuleClock(ADC_MODULE,CLK_CLKSEL1_ADCSEL_HCLK,CLK_CLKDIV_ADC(6));
    CLK_SetModuleClock(ADC_MODULE,CLK_CLKSEL1_ADCSEL_HCLK,CLK_CLKDIV_ADC(180)); /** 276.480kHzʱÖÓ */
    CLK_EnableModuleClock(PWMCH01_MODULE);
    CLK_EnableModuleClock(PWMCH23_MODULE);

    SystemCoreClockUpdate();
    xx = CLK_GetPLLClockFreq();
    yy = CLK_GetHCLKFreq();
    /* Lock protected registers */
		SYS_LockReg();
		

}
uint16_t pwm_duty[4] = {100,400,600,800};
uint16_t adc2_value[2];
uint8_t somtingtest[3] = {0x12,0x32,0x44};
uint8_t testdata[40] = {0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x13,0x12,0x12,0x12,0x13,0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x13,0x12,0x12,0x12,0x13,0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x13,0x12,0x12,0x12,0x13,0x12};
uint16_t sb;
uint8_t count;

uint8_t dat[0x40];
void sometingtest(void)
{
    sb =1 ;
}
void sometingtest2(void)
{
    sb =2 ;
    iic_start_read_bytes(0x76,0x10,dat,0x12,NULL,NULL);
}

int main()
{
    /* sys & clock */    
    SYS_Init();
    /* hardware i2c */    
    iic_pan159_init();
    /* hardware spi */  
    rfspi_pan159_init();
    /* hardware pwm */  
    pwm_pan159_init(1);
    /* adc */  
    adc_pan159_init();
    /* rf-297L */  
    rf_init();
    /* uart */
    uart_init_pan159();
    /* TIMER0 */ 
    timer_pan159_init(500,sometingtest2);
    printf("adc value is");
  //below is for test
    bsp_led_init();
    while(1) {  
      bsp_led_blink();
      delay_ms(125);      
    } //end while?
  
  
  
  
  
  
  
  
  
  //above is for test
    flash_pan159_erase(FMC_SPROM_BASE,1);
    flash_pan159_write(FMC_SPROM_BASE,testdata,13);
    flash_pan159_read(FMC_SPROM_BASE,testdata,13);
    xn297l_tx_mode();
    //pwm_pan159_setDuty(pwm_duty);
    //DrvWDT_Init(WDT_TIMEOUT_2POW6);
    while(1){
        uart_send(somtingtest,3);
        xn297l_tx_data(testdata,13);
        adc_pan159_samp1(adc2_value);
        //pwm_pan159_setDuty(pwm_duty);
        count++;
        switch(count){
            case 1:
                pwm_duty[1] = 200;
                pwm_pan159_setDuty(pwm_duty);
                break;
            case 2:
                pwm_duty[1] = 0;
                pwm_pan159_setDuty(pwm_duty);
                break;
            case 3:
                pwm_duty[1] = 800;
                pwm_pan159_setDuty(pwm_duty);
                count = 0;
                break;
            default :
                count = 0;
        }
        uint8_t somting[5] = {0x89,2,3,4,5};
        iic_start_send_bytes(0x76,0x0C,somting,1,NULL,NULL);
        delay_ms(50);
        
        iic_start_read_bytes(0x76,0x10,dat,0x12,NULL,NULL);
        delay_ms(1);
        iic_start_read_bytes(0x76,0x10,dat,0x12,NULL,NULL);
        delay_ms(1);
        
        iic_start_read_bytes(0x76,0x10,dat,0x12,NULL,NULL);
        delay_ms(1);
        iic_start_read_bytes(0x76,0x10,dat,0x30,sometingtest,sometingtest);
        //(I2C0)->CTL |= (I2C_CTL_SI_Msk | I2C_CTL_STO_Msk);
        __disable_irq();
//        flash_pan159_erase(FMC_SPROM_BASE,1);
//        flash_pan159_write(FMC_SPROM_BASE,testdata,40);
//        flash_pan159_read(FMC_SPROM_BASE,testdata,40);
		__enable_irq();
        }

}

/*** (C) COPYRIGHT 2015 Nuvoton Technology Corp. ***/